#BLINDO PLUS
HARD RESIN CLEAR BASE COAT
#Blindo Plus is a new coating concept: it creates an ultra-fine, transparent layer that increases the hydrophobic properties of the surface and is more resistant to the adhesion of salt deposits (limestone) and to the action of corrosive agents (rain, salts, detergents, etc.). It also has greater chemical stability for improved durability over time.
#BLINDO PLUS cannot be purchased separately
Share
#Blindo Plus is a new coating concept: it creates an ultra-fine, transparent layer that increases the hydrophobic properties of the surface and is more resistant to the adhesion of salt deposits (limestone) and to the action of corrosive agents (rain, salts, detergents, etc.). It also has greater chemical stability for improved durability over time.
Its innovative formula based on a complex resin with high molecular weight, featuring a siloxane “core” with a polyhedral 3D “cage” structure ensures effective stratification, improved cross-linking rigidity, thermal resistance and high protection and resistance to abrasion, which is superior to that of traditional physical inorganic coatings. Thanks to its complex molecular structure, once it is in contact with the bodywork, it bonds quickly with the surface (Nano-Link) that, combined with the new SFC self-fast-curing technology, offers a closing time of just 70 minutes: no more waiting several hours for the coating to be ready!
In addition, thanks to its ultra-fast polymerisation, it can also be applied in environments with a low working temperature, thereby avoiding the use of UV lamps.
Its innovative formula allows stratification and thanks to the application of 2 layers of #Blindo Plus, the easy repair technology is activated. Like a normal clear coat, it can be polished, re-applied or stratified with our #HPC overcoat, with no need for sanding, so that repairs can be carried out even after one year or after 15000 km. #Blindo protects the paint and leaves a glossy glass-like finish similar to that of sweets.
#Blindo Plus is our Premium Base Coat that is used to stratify the next layers until an extremely hard surface is achieved. The next layers can be applied ONE HOUR after the first application thereby saving a great amount of time
#Blindo Plus ensures very high performance and a duration of at least 30,000 km without maintenance and is compatible with the entire #Labocosmetica coating line.
SURFACE PREPARATION :
An accurate preparation of the surface to be treated is essential for the correct fixing and maintenance of the coating. We recommend that you always observe these simple rules:
- the surface must be decontaminated and free from any residue;
- remove old waxes, sealants or coatings from the surface before proceeding;
- the surface must be perfectly free from scratches superficial , marks and stains which, if present, must be removed with a polisher;
- if you are working with a new car that does not require corrective paint work , proceed with a decontaminating wash to remove any residues from transport;
- the bodywork must be completely degreased : use # VÈRITAS in the dilution 1: 5 before applying the coating. This step is mandatory!
SUGGESTIONS FOR APPLICATION :
Always apply the coating in covered and dust-free environments , never outdoors. We recommend the use of PPE (Personal Protective Equipment) in this case the solvent vapor mask. Never work in direct sunlight. Make sure the work area is well ventilated. There are two main factors that influence the application of coatings: temperature and humidity . The higher the temperature and / or humidity, the shorter the coating time will be. We recommend working on small sections of maximum 50x50cm. It is essential to use correct lighting. Apply the coating using reflected lights. Point your light towards the wall or ceiling – this will help you spot possible burrs that you will need to remove immediately. The initial fixing time of the #BLINDO PLUS and #HPC coatings of #Labocosmetica with the treated surface is a few minutes: then use microfibre cloths to eliminate residues and carry out the finishing. Make sure that the car remains in optimal conditions without the risk of rain or sudden changes in humidity: the curing time necessary to allow the partial closure of the coating takes place within 12 hours, while the total one takes place within 36 hours and it is advisable not to wash the car for the first 7/10 days . If you have an infrared lamp, place it at a distance of 50cm for about 15-20 minutes at a temperature of 60 ° C to fix the coating to the surface. Always respect the application instructions of the individual products.
Instructions:
Results:
Dilution:
Car parts
Materials
Type
H304 May be fatal if swallowed and if it enters the respiratory tract.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects.
P210 Keep away from heat sources, hot surfaces, sparks, open flames or other sources of ignition. Do not smoke.
P261 Avoid breathing mist / vapors / spray. P280 Wear protective gloves / goggles / face protection.
& nbsp;
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER / doctor.
P305 + P351 + P338 IN CASE OF EYE CONTACT: rinse thoroughly for several minutes. Remove any contact lenses if easy to do. Continue rinsing.
P403 + P233 Keep container tightly closed and in a well-ventilated place. Contains: naphtha (petroleum), light alkylation, distillates (petroleum), light hydrotreated.
H372 Causes damage to the central nervous system through prolonged or repeated exposure.
P280 Wear protective gloves / goggles / face protection.
P501 Dispose of contents / container in accordance with local / regional / national / international regulations.
Contains: di-n-butyl-ether.
#BLINDO PLUS
100% PHYSICAL REPARABLE
Formulated to meet the needs of professionals who require high performance in terms of protection combined with a high curing speed
SILK-MIRROR EFFECT
The #LABOCOSMETICA system gives the treated surfaces a unique silk-mirror effect. The surfaces are so smooth that dirt has no way of adhering: this is the Lotus effect system.
